#include <OneWire.h>
#include <DallasTemperature.h>
 // Data wire is plugged into pin 2 on the Arduino#define ONE_WIRE_BUS 2
 // Setup a oneWire instance to communicate with any OneWire devices 
// (not just Maxim/Dallas temperature ICs)OneWire oneWire(ONE_WIRE_BUS);
 // Pass our oneWire reference to Dallas Temperature.DallasTemperature sensors(&oneWire);
 void setup(void)
{
  // start serial port  Serial.begin(9600);
  Serial.println("ROBOTUS DS18B20 DENEY PROGRAMI");
  // Start up the library  sensors.begin();
}
 
 void loop(void)
{
  // call sensors.requestTemperatures() to issue a global temperature  // request to all devices on the bus 

 Serial.print(" Requesting temperatures...");
  sensors.requestTemperatures(); // Send the command to get temperatures  Serial.println("DONE");
  Serial.print("Temperature for Device 1 is: ");
  Serial.print(sensors.getTempCByIndex(0)); // Why "byIndex"?
// You can have more than one IC on the same bus.
// 0 refers to the first IC on the wire 
}

//////////////////////////////////////////////////